Hot Selling LED Strip Cutting Machine and PCB Separator

ChuangWei and SMTfly is professional in PCB depaneling technologies covering v-groove depaneling, punching, router & laser.

Upon now, model CWVC-3S has become our best hot selling models for LED strip cutting with a special design which uses 3 blade sets to finish the whole cutting.The first blade set cuts 20% of the PCB v-groove, the second blade set cuts 40% of the PCB v-groove, and the third blade set cuts the last 40% to finish depaneling. Comparing with the traditional way, cutting stress reduced more than 80%. Besides, PCB is level and smooth without warp after depaneling.
Clients could also select the suitable cutting speed according to their needs.

In order to meet larger capacity, we also have a model CWVC-4S which separate 2 PCBs at the same time!

If you are interested in our machines, please visit us at:
http://www.pcb-depaneling.com

CWVC-3S, LED Strip Cutting Machine

PCB Router for Automotive Industries Factories

A Depaneling router is a machine similar to wood router. It uses a router bit to mill the material of the PCB. The hardness of the PCB material wears down the bit, which must be replaced periodically.

Routing requires that single boards are connected using tabs in a panel. The bit mills the whole material of the tab. It produces much dust that has to be vacuumed. It is important for the vacuum system to be ESD-safe. Also the fixturing of the PCB must be tight - usually an aluminium jig or a vacuum holding system is used.

It is very helpful for automotive industrial PCB boards.

The two most important parameters of the routing process are: feed rate and rotational speed. They are chosen according to the bit type and diameter and should remain proportional (i.e. increasing feed rate should be done together with increasing the rotational speed).

Rotational speed depends on the motor spindle. In order to meet customer higher requirements, we are using Germany KAVO spindle which is more stable. It is also popular with our foreign clients!

International Printed Circuit & APEX South China Fair

The exhibition has achieved good feedback results.
Especially in the follow-up product development direction, the idea is more clear.
We will improve our machines to meet different customers' requirements.
And we believe that we will do better and better.
http://www.pcb-depaneling.com

Laser PCB Cutting Machine Application

ChuangWei laser pcb cutting machine use imported UV laser with 10W, 12W, 15W & 18W for different applications covering FPC panel & FR4 panels.

For more info of our laser cutting machines, please visit below links:

http://pcb-depanelizer.com/index.php/photo/index/id/40.html

http://pcb-depaneling.com/index.php/photo/index/id/39.html

http://pcba-separator.com/index.php/list/index/id/68.html

PCB Router become good helper for Automative Electronics

With the rapid development of the automotive electronics industry, PCB depaneling requirements are getting higher and higher, and ChuangWei manufacture high-precision PCB router machine just to meet the automotive electronics industry PCB requirements. Cutting precision is 0.01mm!

We could offer Germany Spindle(KAVO or JAGER) for clients’ selection!

Our model with 1 table 1 head, 1 table 2 heads, 2 table 1 head covers all applications for automotive electronics customers!

Creation of PCB separator machine

In the modern industrial society， more and more electronics factory prefer automation,to reduce the artificial management cost.

ChuangWei factory in order to meet clients' requirements,organize Engineering Department to hold regular seminars to seek product innovation and improvement.

The following New PCB separator machine is the result of our innovation!

The Importance of Safety Production for PCB Depaneling Machines

8 Die, 10 Injured In Fire At Sivakasi Cracker Factory On 20th Oct. 

The fire started as crackers were being offloaded from a vehicle to a shop.

Among the deceased are a few patients who were waiting at an adjoining pathological test centre, where the fire had quickly spread. Several vehicles parked in the area were also damaged.

Fire accidents are common in the run-up to Diwali at Sivakasi, which has thousands of cracker manufacturing units. At one time, the industry was notorious for employing thousands of children.

Safety production is become more and more important now.

As the largest PCB depaneling machine manufactory in China, we will not hire children under 18 years of age, all production measures to comply with state regulations, and do the relevant preventive measures to give employees a good working environment, to produce more valuable PCB depaneling machines for clients all over the world!

PCB Connection Way Request Different Depaneling Machines

There are v-score lines and milling joints connection for all FR1, FD4, CEM1, CEM3, MCPCB, FPC panels covering all industries: LED Lighting, Mobile Phone, Automotive Electronics, Computer, Household Electrical Appliance, Power Supply, Wire and connector.

1. V-score lines panel solutions:
 V-groove PCB depanelizer machines, such as our below models:
 A.CWV-1M series: Manual PCB depanelizer
 B.CWV-1A series: Automatic PCB depanelizer
 C.CWV-330 series: Pneumatic PCB depanelizer
 D.CWVC-5 series: Multi-blade PCB depanelizer

2. Milling joints connection panel solutions:
 A.PCB Nibbler: CWV-LT
 B.PCB Punching: CWPE, CWPL
 C.PCB Routing: CW-F01, CW-F01-S
 D.Laser PCB Separator:CWVC-5L

No mater what kind of panels you have, we could offer you a good solution to meet your requirements!
Contact us at sales@dgwill.com
http://www.pcb-depaneling.com
http://www.pcba-separator.com
http://www.pcbapunching.com

PCB depaneling

We are the largest manufacturer of PCB depanelizer machines in Chin since 2004, offering all solutions for v-groove pcb panels, milling joints panels, flexible FPC by using our pcb depaneling machines, including pcb router, pcb punching, laser pcb cutting machine, ect.

In the recent years, workers salary is getting higher and higher, we are keep improving on designing new pcb depanelizers to save cost for clients. We had already developed some new machines to separate a few PCBs per time to save 3-4 workers at least.

If you want to save money, please visit us at below website:

http://www.pcb-depanelizer.com

http://www.pcb-depaneling.com

Contact Amy at sales@dgwill.com